Update #5
Merged
Update #5
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
…P Mode commit 3776c68 upstream. Currently, whenever there is a need to transmit an Action frame, the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to firmware. The P2P interfaces were available when wpa_supplicant is managing the wlan interface. However, the P2P interfaces are not created/initialized when only hostapd is managing the wlan interface. And if hostapd receives an ANQP Query REQ Action frame even from an un-associated STA, the brcmfmac driver tries to use an uninitialized P2P vif pointer for sending the IOVAR to firmware. This NULL pointer dereferencing triggers a driver crash. [ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] [ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [...] [ 1417.075653] Call trace: [ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac] [ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac] [ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211] [ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211] [ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158 [ 1417.076302] genl_rcv_msg+0x220/0x2a0 [ 1417.076317] netlink_rcv_skb+0x68/0x140 [ 1417.076330] genl_rcv+0x40/0x60 [ 1417.076343] netlink_unicast+0x330/0x3b8 [ 1417.076357] netlink_sendmsg+0x19c/0x3f8 [ 1417.076370] __sock_sendmsg+0x64/0xc0 [ 1417.076391] ____sys_sendmsg+0x268/0x2a0 [ 1417.076408] ___sys_sendmsg+0xb8/0x118 [ 1417.076427] __sys_sendmsg+0x90/0xf8 [ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40 [ 1417.076465] invoke_syscall+0x50/0x120 [ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0 [ 1417.076506] do_el0_svc+0x24/0x38 [ 1417.076525] el0_svc+0x30/0x100 [ 1417.076548] el0t_64_sync_handler+0x100/0x130 [ 1417.076569] el0t_64_sync+0x190/0x198 [ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000) Fix this, by always using the vif corresponding to the wdev on which the Action frame Transmission request was initiated by the userspace. This way, even if P2P vif is not available, the IOVAR is sent to firmware on AP vif and the ANQP Query RESP Action frame is transmitted without crashing the driver. Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev() to brcmf_p2p_attach(). Because the former function would not get executed when only hostapd is managing wlan interface, and it is not safe to do reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior init_completion(). And in the brcmf_p2p_tx_action_frame() function, the condition check for P2P Presence response frame is not needed, since the wpa_supplicant is properly sending the P2P Presense Response frame on the P2P-GO vif instead of the P2P-Device vif. Cc: stable@vger.kernel.org Fixes: 18e2f61 ("brcmfmac: P2P action frame tx") Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20251013102819.9727-1-gokulkumar.sivakumar@infineon.com [Cc stable] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There were various points where the loader was using uninitialised data, had the potential to run off the end of an array, or was handling core functions incorrectly. Fix these up. Also handle 24bpp and 32bpp framebuffers. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
The mappings are the reverse of r8g8b8 and r5g6b5 respectively Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Modify the PDAF Datatype of the Arducam 64MP camera from 0x30 to 0x12 so that the Raspberry Pi 5 cfe driver can receive PDAF data. Signed-off-by: Lee Jackson <info@arducam.com>
This driver will be installed through DKMS going forward. Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
commit 9f64b3c upstream. In normal operation, a registered exec queue is disabled and deregistered through the GuC, and freed only after the GuC confirms completion. However, if the driver is forced to unbind while the exec queue is still running, the user may call exec_destroy() after the GuC has already been stopped and CT communication disabled. In this case, the driver cannot receive a response from the GuC, preventing proper cleanup of exec queue resources. Fix this by directly releasing the resources when GuC is not running. Here is the failure dmesg log: " [ 468.089581] ---[ end trace 0000000000000000 ]--- [ 468.089608] pci 0000:03:00.0: [drm] *ERROR* GT0: GUC ID manager unclean (1/65535) [ 468.090558] pci 0000:03:00.0: [drm] GT0: total 65535 [ 468.090562] pci 0000:03:00.0: [drm] GT0: used 1 [ 468.090564] pci 0000:03:00.0: [drm] GT0: range 1..1 (1) [ 468.092716] ------------[ cut here ]------------ [ 468.092719] WARNING: CPU: 14 PID: 4775 at drivers/gpu/drm/xe/xe_ttm_vram_mgr.c:298 ttm_vram_mgr_fini+0xf8/0x130 [xe] " v2: use xe_uc_fw_is_running() instead of xe_guc_ct_enabled(). As CT may go down and come back during VF migration. Fixes: dd08ebf ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: stable@vger.kernel.org Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20251010172529.2967639-2-shuicheng.lin@intel.com (cherry picked from commit 9b42321) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 812258f upstream. The kernel uses the standard rustc targets for non-x86 targets, and out of those only 64-bit arm's target has kcfi support enabled. For x86, the custom 64-bit target enables kcfi. The HAVE_CFI_ICALL_NORMALIZE_INTEGERS_RUSTC config option that allows CFI_CLANG to be used in combination with RUST does not check whether the rustc target supports kcfi. This breaks the build on riscv (and presumably 32-bit arm) when CFI_CLANG and RUST are enabled at the same time. Ordinarily, a rustc-option check would be used to detect target support but unfortunately rustc-option filters out the target for reasons given in commit 46e24a5 ("rust: kasan/kbuild: fix missing flags on first build"). As a result, if the host supports kcfi but the target does not, e.g. when building for riscv on x86_64, the build would remain broken. Instead, make HAVE_CFI_ICALL_NORMALIZE_INTEGERS_RUSTC depend on the only two architectures where the target used supports it to fix the build. CC: stable@vger.kernel.org Fixes: ca627e6 ("rust: cfi: add support for CFI_CLANG with Rust") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20250908-distill-lint-1ae78bcf777c@spud Signed-off-by: Paul Walmsley <pjw@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2b77f4 upstream. Fix three refcount inconsistency issues related to `cifs_sb_tlink`. Comments for `cifs_sb_tlink` state that `cifs_put_tlink()` needs to be called after successful calls to `cifs_sb_tlink()`. Three calls fail to update refcount accordingly, leading to possible resource leaks. Fixes: 8ceb984 ("CIFS: Move rename to ops struct") Fixes: 2f1afe2 ("cifs: Use smb 2 - 3 and cifsacl mount options getacl functions") Fixes: 366ed84 ("cifs: Use smb 2 - 3 and cifsacl mount options setacl function") Cc: stable@vger.kernel.org Signed-off-by: Shuhao Fu <sfual@cse.ust.hk> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 86f54f9 upstream. If obj_exts allocation failed, slab->obj_exts is set to OBJEXTS_ALLOC_FAIL, But we do not clear it when freeing the slab. Since OBJEXTS_ALLOC_FAIL and MEMCG_DATA_OBJEXTS currently share the same bit position, during the release of the associated folio, a VM_BUG_ON_FOLIO() check in folio_memcg_kmem() is triggered because the OBJEXTS_ALLOC_FAIL flag was not cleared, causing it to be interpreted as a kmem folio (non-slab) with MEMCG_OBJEXTS_DATA flag set, which is invalid because MEMCG_OBJEXTS_DATA is supposed to be set only on slabs. Another problem that predates sharing the OBJEXTS_ALLOC_FAIL and MEMCG_DATA_OBJEXTS bits is that on configurations with is_check_pages_enabled(), the non-cleared bit in page->memcg_data will trigger a free_page_is_bad() failure "page still charged to cgroup" When freeing a slab, we clear slab->obj_exts if the obj_ext array has been successfully allocated. So let's clear it also when the allocation has failed. Fixes: 09c4656 ("codetag: debug: introduce OBJEXTS_ALLOC_FAIL to mark failed slab_ext allocations") Fixes: 7612833 ("slab: Reuse first bit for OBJEXTS_ALLOC_FAIL") Link: https://lore.kernel.org/all/20251015141642.700170-1-hao.ge@linux.dev/ Cc: <stable@vger.kernel.org> Signed-off-by: Hao Ge <gehao@kylinos.cn> Reviewed-by: Suren Baghdasaryan <surenb@google.com> Reviewed-by: Harry Yoo <harry.yoo@oracle.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75527d6 upstream. rtl8152_driver_init() is missing the error handling. When rtl8152_driver registration fails, rtl8152_cfgselector_driver should be deregistered. Fixes: ec51fbd ("r8152: add USB device driver for config selection") Cc: stable@vger.kernel.org Signed-off-by: Yi Cong <yicong@kylinos.cn> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251011082415.580740-1-yicongsrfy@163.com [pabeni@redhat.com: clarified the commit message] Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d5c4f5 upstream. Assuming the disk layout as below, disk0: 0 --- 0x00035abfff disk1: 0x00035ac000 --- 0x00037abfff disk2: 0x00037ac000 --- 0x00037ebfff and we want to read data from offset=13568 having len=128 across the block devices, we can illustrate the block addresses like below. 0 .. 0x00037ac000 ------------------- 0x00037ebfff, 0x00037ec000 ------- | ^ ^ ^ | fofs 0 13568 13568+128 | ------------------------------------------------------ | LBA 0x37e8aa9 0x37ebfa9 0x37ec029 --- map 0x3caa9 0x3ffa9 In this example, we should give the relative map of the target block device ranging from 0x3caa9 to 0x3ffa9 where the length should be calculated by 0x37ebfff + 1 - 0x37ebfa9. In the below equation, however, map->m_pblk was supposed to be the original address instead of the one from the target block address. - map->m_len = min(map->m_len, dev->end_blk + 1 - map->m_pblk); Cc: stable@vger.kernel.org Fixes: 71f2c82 ("f2fs: multidevice: support direct IO") Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c652c3 upstream. When releasing file system metadata blocks in jbd2_journal_forget(), if this buffer has not yet been checkpointed, it may have already been written back, currently be in the process of being written back, or has not yet written back. jbd2_journal_forget() calls jbd2_journal_try_remove_checkpoint() to check the buffer's status and add it to the current transaction if it has not been written back. This buffer can only be reallocated after the transaction is committed. jbd2_journal_try_remove_checkpoint() attempts to lock the buffer and check its dirty status while holding the buffer lock. If the buffer has already been written back, everything proceeds normally. However, there are two issues. First, the function returns immediately if the buffer is locked by the write-back process. It does not wait for the write-back to complete. Consequently, until the current transaction is committed and the block is reallocated, there is no guarantee that the I/O will complete. This means that ongoing I/O could write stale metadata to the newly allocated block, potentially corrupting data. Second, the function unlocks the buffer as soon as it detects that the buffer is still dirty. If a concurrent write-back occurs immediately after this unlocking and before clear_buffer_dirty() is called in jbd2_journal_forget(), data corruption can theoretically still occur. Although these two issues are unlikely to occur in practice since the undergoing metadata writeback I/O does not take this long to complete, it's better to explicitly ensure that all ongoing I/O operations are completed. Fixes: 5975992 ("jbd2: discard dirty data when forgetting an un-journalled buffer") Cc: stable@kernel.org Suggested-by: Jan Kara <jack@suse.cz> Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Message-ID: <20250916093337.3161016-2-yi.zhang@huaweicloud.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 328a782 upstream. When freeing metadata blocks in nojournal mode, ext4_forget() calls bforget() to clear the dirty flag on the buffer_head and remvoe associated mappings. This is acceptable if the metadata has not yet begun to be written back. However, if the write-back has already started but is not yet completed, ext4_forget() will have no effect. Subsequently, ext4_mb_clear_bb() will immediately return the block to the mb allocator. This block can then be reallocated immediately, potentially causing an data corruption issue. Fix this by clearing the buffer's dirty flag and waiting for the ongoing I/O to complete, ensuring that no further writes to stale data will occur. Fixes: 16e08b1 ("ext4: cleanup clean_bdev_aliases() calls") Cc: stable@kernel.org Reported-by: Gao Xiang <hsiangkao@linux.alibaba.com> Closes: https://lore.kernel.org/linux-ext4/a9417096-9549-4441-9878-b1955b899b4e@huaweicloud.com/ Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Message-ID: <20250916093337.3161016-3-yi.zhang@huaweicloud.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d3ad18 upstream. syzbot reported a BUG_ON in ext4_es_cache_extent() when opening a verity file on a corrupted ext4 filesystem mounted without a journal. The issue is that the filesystem has an inode with both the INLINE_DATA and EXTENTS flags set: EXT4-fs error (device loop0): ext4_cache_extents:545: inode #15: comm syz.0.17: corrupted extent tree: lblk 0 < prev 66 Investigation revealed that the inode has both flags set: DEBUG: inode 15 - flag=1, i_inline_off=164, has_inline=1, extents_flag=1 This is an invalid combination since an inode should have either: - INLINE_DATA: data stored directly in the inode - EXTENTS: data stored in extent-mapped blocks Having both flags causes ext4_has_inline_data() to return true, skipping extent tree validation in __ext4_iget(). The unvalidated out-of-order extents then trigger a BUG_ON in ext4_es_cache_extent() due to integer underflow when calculating hole sizes. Fix this by detecting this invalid flag combination early in ext4_iget() and rejecting the corrupted inode. Cc: stable@kernel.org Reported-and-tested-by: syzbot+038b7bf43423e132b308@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=038b7bf43423e132b308 Suggested-by: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com> Reviewed-by: Zhang Yi <yi.zhang@huawei.com> Message-ID: <20250930112810.315095-1-kartikey406@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…unning commit 7e5a598 upstream. When starting relocation, at reloc_chunk_start(), if we happen to find the flag BTRFS_FS_RELOC_RUNNING is already set we return an error (-EINPROGRESS) to the callers, however the callers call reloc_chunk_end() which will clear the flag BTRFS_FS_RELOC_RUNNING, which is wrong since relocation was started by another task and still running. Finding the BTRFS_FS_RELOC_RUNNING flag already set is an unexpected scenario, but still our current behaviour is not correct. Fix this by never calling reloc_chunk_end() if reloc_chunk_start() has returned an error, which is what logically makes sense, since the general widespread pattern is to have end functions called only if the counterpart start functions succeeded. This requires changing reloc_chunk_start() to clear BTRFS_FS_RELOC_RUNNING if there's a pending cancel request. Fixes: 907d271 ("btrfs: add cancellable chunk relocation support") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53a4acb upstream. On 'btrfs_ioctl_qgroup_assign' we first duplicate the argument as provided by the user, which is kfree'd in the end. But this was not the case when allocating memory for 'prealloc'. In this case, if it somehow failed, then the previous code would go directly into calling 'mnt_drop_write_file', without freeing the string duplicated from the user space. Fixes: 4addc1f ("btrfs: qgroup: preallocate memory before adding a relation") CC: stable@vger.kernel.org # 6.12+ Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ab2fa6 upstream. The intent of btrfs_readahead_expand() was to expand to the length of the current compressed extent being read. However, "ram_bytes" is *not* that, in the case where a single physical compressed extent is used for multiple file extents. Consider this case with a large compressed extent C and then later two non-compressed extents N1 and N2 written over C, leaving C1 and C2 pointing to offset/len pairs of C: [ C ] [ N1 ][ C1 ][ N2 ][ C2 ] In such a case, ram_bytes for both C1 and C2 is the full uncompressed length of C. So starting readahead in C1 will expand the readahead past the end of C1, past N2, and into C2. This will then expand readahead again, to C2_start + ram_bytes, way past EOF. First of all, this is totally undesirable, we don't want to read the whole file in arbitrary chunks of the large underlying extent if it happens to exist. Secondly, it results in zeroing the range past the end of C2 up to ram_bytes. This is particularly unpleasant with fs-verity as it can zero and set uptodate pages in the verity virtual space past EOF. This incorrect readahead behavior can lead to verity verification errors, if we iterate in a way that happens to do the wrong readahead. Fix this by using em->len for readahead expansion, not em->ram_bytes, resulting in the expected behavior of stopping readahead at the extent boundary. Reported-by: Max Chernoff <git@maxchernoff.ca> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2399898 Fixes: 9e9ff87 ("btrfs: use readahead_expand() on compressed extents") CC: stable@vger.kernel.org # 6.17 Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…out an RST commit fec9b9d upstream. At the end of btrfs_load_block_group_zone_info() the first thing we do is to ensure that if the mapping type is not a SINGLE one and there is no RAID stripe tree, then we return early with an error. Doing that, though, prevents the code from running the last calls from this function which are about freeing memory allocated during its run. Hence, in this case, instead of returning early, we set the ret value and fall through the rest of the cleanup code. Fixes: 5906333 ("btrfs: zoned: don't skip block group profile checks on conventional zones") CC: stable@vger.kernel.org # 6.8+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…ce tree commit a5a51bf upstream. Currently, when building a free space tree at populate_free_space_tree(), if we are not using the block group tree feature, we always expect to find block group items (either extent items or a block group item with key type BTRFS_BLOCK_GROUP_ITEM_KEY) when we search the extent tree with btrfs_search_slot_for_read(), so we assert that we found an item. However this expectation is wrong since we can have a new block group created in the current transaction which is still empty and for which we still have not added the block group's item to the extent tree, in which case we do not have any items in the extent tree associated to the block group. The insertion of a new block group's block group item in the extent tree happens at btrfs_create_pending_block_groups() when it calls the helper insert_block_group_item(). This typically is done when a transaction handle is released, committed or when running delayed refs (either as part of a transaction commit or when serving tickets for space reservation if we are low on free space). So remove the assertion at populate_free_space_tree() even when the block group tree feature is not enabled and update the comment to mention this case. Syzbot reported this with the following stack trace: BTRFS info (device loop3 state M): rebuilding free space tree assertion failed: ret == 0 :: 0, in fs/btrfs/free-space-tree.c:1115 ------------[ cut here ]------------ kernel BUG at fs/btrfs/free-space-tree.c:1115! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 6352 Comm: syz.3.25 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 RIP: 0010:populate_free_space_tree+0x700/0x710 fs/btrfs/free-space-tree.c:1115 Code: ff ff e8 d3 (...) RSP: 0018:ffffc9000430f780 EFLAGS: 00010246 RAX: 0000000000000043 RBX: ffff88805b709630 RCX: fea61d0e2e79d000 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffffc9000430f8b0 R08: ffffc9000430f4a7 R09: 1ffff92000861e94 R10: dffffc0000000000 R11: fffff52000861e95 R12: 0000000000000001 R13: 1ffff92000861f00 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007f424d9fe6c0(0000) GS:ffff888125afc000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd78ad212c0 CR3: 0000000076d68000 CR4: 00000000003526f0 Call Trace: <TASK> btrfs_rebuild_free_space_tree+0x1ba/0x6d0 fs/btrfs/free-space-tree.c:1364 btrfs_start_pre_rw_mount+0x128f/0x1bf0 fs/btrfs/disk-io.c:3062 btrfs_remount_rw fs/btrfs/super.c:1334 [inline] btrfs_reconfigure+0xaed/0x2160 fs/btrfs/super.c:1559 reconfigure_super+0x227/0x890 fs/super.c:1076 do_remount fs/namespace.c:3279 [inline] path_mount+0xd1a/0xfe0 fs/namespace.c:4027 do_mount fs/namespace.c:4048 [inline] __do_sys_mount fs/namespace.c:4236 [inline] __se_sys_mount+0x313/0x410 fs/namespace.c:4213 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f424e39066a Code: d8 64 89 02 (...) RSP: 002b:00007f424d9fde68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 00007f424d9fdef0 RCX: 00007f424e39066a RDX: 0000200000000180 RSI: 0000200000000380 RDI: 0000000000000000 RBP: 0000200000000180 R08: 00007f424d9fdef0 R09: 0000000000000020 R10: 0000000000000020 R11: 0000000000000246 R12: 0000200000000380 R13: 00007f424d9fdeb0 R14: 0000000000000000 R15: 00002000000002c0 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Reported-by: syzbot+884dc4621377ba579a6f@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/68dc3dab.a00a0220.102ee.004e.GAE@google.com/ Fixes: a5ed918 ("Btrfs: implement the free space B-tree") CC: <stable@vger.kernel.org> # 6.1.x: 1961d20: btrfs: fix assertion when building free space tree CC: <stable@vger.kernel.org> # 6.1.x Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a12f0bc upstream. The gs_usb driver supports USB devices with more than 1 CAN channel. In old kernel before 3.15, it uses net_device->dev_id to distinguish different channel in userspace, which was done in commit acff76f ("can: gs_usb: gs_make_candev(): set netdev->dev_id"). But since 3.15, the correct way is populating net_device->dev_port. And according to documentation, if network device support multiple interface, lack of net_device->dev_port SHALL be treated as a bug. Fixes: acff76f ("can: gs_usb: gs_make_candev(): set netdev->dev_id") Cc: stable@vger.kernel.org Signed-off-by: Celeste Liu <uwu@coelacanthus.name> Link: https://patch.msgid.link/20250930-gs-usb-populate-net_device-dev_port-v1-1-68a065de6937@coelacanthus.name Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a27f6a upstream. This issue was found by Runcheng Lu when develop HSCanT USB to CAN FD converter[1]. The original developers may have only 3 interfaces device to test so they write 3 here and wait for future change. During the HSCanT development, we actually used 4 interfaces, so the limitation of 3 is not enough now. But just increase one is not future-proofed. Since the channel index type in gs_host_frame is u8, just make canch[] become a flexible array with a u8 index, so it naturally constraint by U8_MAX and avoid statically allocate 256 pointer for every gs_usb device. [1]: https://github.com/cherry-embedded/HSCanT-hardware Fixes: d08e973 ("can: gs_usb: Added support for the GS_USB CAN devices") Reported-by: Runcheng Lu <runcheng.lu@hpmicro.com> Cc: stable@vger.kernel.org Reviewed-by: Vincent Mailhol <mailhol@kernel.org> Signed-off-by: Celeste Liu <uwu@coelacanthus.name> Link: https://patch.msgid.link/20250930-gs-usb-max-if-v5-1-863330bf6666@coelacanthus.name Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6447b0e upstream. Malicious SMB server can send invalid reply to FSCTL_DFS_GET_REFERRALS - reply smaller than sizeof(struct get_dfs_referral_rsp) - reply with number of referrals smaller than NumberOfReferrals in the header Processing of such replies will cause oob. Return -EINVAL error on such replies to prevent oob-s. Signed-off-by: Eugene Korenevsky <ekorenevsky@aliyun.com> Cc: stable@vger.kernel.org Suggested-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…encies commit 5801e65 upstream. When adding dependencies with drm_sched_job_add_dependency(), that function consumes the fence reference both on success and failure, so in the latter case the dma_fence_put() on the error path (xarray failed to expand) is a double free. Interestingly this bug appears to have been present ever since commit ebd5f74 ("drm/sched: Add dependency tracking"), since the code back then looked like this: drm_sched_job_add_implicit_dependencies(): ... for (i = 0; i < fence_count; i++) { ret = drm_sched_job_add_dependency(job, fences[i]); if (ret) break; } for (; i < fence_count; i++) dma_fence_put(fences[i]); Which means for the failing 'i' the dma_fence_put was already a double free. Possibly there were no users at that time, or the test cases were insufficient to hit it. The bug was then only noticed and fixed after commit 9c2ba26 ("drm/scheduler: use new iterator in drm_sched_job_add_implicit_dependencies v2") landed, with its fixup of commit 4eaf02d ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies"). At that point it was a slightly different flavour of a double free, which commit 963d0b3 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder") noticed and attempted to fix. But it only moved the double free from happening inside the drm_sched_job_add_dependency(), when releasing the reference not yet obtained, to the caller, when releasing the reference already released by the former in the failure case. As such it is not easy to identify the right target for the fixes tag so lets keep it simple and just continue the chain. While fixing we also improve the comment and explain the reason for taking the reference and not dropping it. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Fixes: 963d0b3 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/dri-devel/aNFbXq8OeYl3QSdm@stanley.mountain/ Cc: Christian König <christian.koenig@amd.com> Cc: Rob Clark <robdclark@chromium.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Philipp Stanner <phasta@kernel.org> Cc: Christian König <ckoenig.leichtzumerken@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org # v5.16+ Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://lore.kernel.org/r/20251015084015.6273-1-tvrtko.ursulin@igalia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6df8e84 upstream. The atomic variable vm_fault_info_updated is used to synchronize access to adev->gmc.vm_fault_info between the interrupt handler and get_vm_fault_info(). The default atomic functions like atomic_set() and atomic_read() do not provide memory barriers. This allows for CPU instruction reordering, meaning the memory accesses to vm_fault_info and the vm_fault_info_updated flag are not guaranteed to occur in the intended order. This creates a race condition that can lead to inconsistent or stale data being used. The previous implementation, which used an explicit mb(), was incomplete and inefficient. It failed to account for all potential CPU reorderings, such as the access of vm_fault_info being reordered before the atomic_read of the flag. This approach is also more verbose and less performant than using the proper atomic functions with acquire/release semantics. Fix this by switching to atomic_set_release() and atomic_read_acquire(). These functions provide the necessary acquire and release semantics, which act as memory barriers to ensure the correct order of operations. It is also more efficient and idiomatic than using explicit full memory barriers. Fixes: b97dfa2 ("drm/amdgpu: save vm fault information for amdkfd") Cc: stable@vger.kernel.org Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com> Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0de79f upstream. GFX12 MES uses low 32 bits of status return for success (1 or 0) and high bits for debug information if low bits are 0. GFX11 MES doesn't do this so checking full 64-bit status return for 1 or 0 is still valid. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebfc854 upstream. It was reported that Intel PT address filters do not work in Docker containers. That relates to the use of overlayfs. overlayfs records the backing file in struct vm_area_struct vm_file, instead of the user file that the user mmapped. In order for an address filter to match, it must compare to the user file inode. There is an existing helper file_user_inode() for that situation. Use file_user_inode() instead of file_inode() to get the inode for address filter matching. Example: Setup: # cd /root # mkdir test ; cd test ; mkdir lower upper work merged # cp `which cat` lower # mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged # perf record --buildid-mmap -e intel_pt//u --filter 'filter * @ /root/test/merged/cat' -- /root/test/merged/cat /proc/self/maps ... 55d61d246000-55d61d2e1000 r-xp 00018000 00:1a 3418 /root/test/merged/cat ... [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.015 MB perf.data ] # perf buildid-cache --add /root/test/merged/cat Before: Address filter does not match so there are no control flow packets # perf script --itrace=e # perf script --itrace=b | wc -l 0 # perf script -D | grep 'TIP.PGE' | wc -l 0 # After: Address filter does match so there are control flow packets # perf script --itrace=e # perf script --itrace=b | wc -l 235 # perf script -D | grep 'TIP.PGE' | wc -l 57 # With respect to stable kernels, overlayfs mmap function ovl_mmap() was added in v4.19 but file_user_inode() was not added until v6.8 and never back-ported to stable kernels. FMODE_BACKING that it depends on was added in v6.5. This issue has gone largely unnoticed, so back-porting before v6.8 is probably not worth it, so put 6.8 as the stable kernel prerequisite version, although in practice the next long term kernel is 6.12. Closes: https://lore.kernel.org/linux-perf-users/aBCwoq7w8ohBRQCh@fremen.lan Reported-by: Edd Barrett <edd@theunixzoo.co.uk> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Amir Goldstein <amir73il@gmail.com> Cc: stable@vger.kernel.org # 6.8 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8818f50 upstream. Some file systems like FUSE-based ones or overlayfs may record the backing file in struct vm_area_struct vm_file, instead of the user file that the user mmapped. Since commit def3ae8 ("fs: store real path instead of fake path in backing file f_path"), file_path() no longer returns the user file path when applied to a backing file. There is an existing helper file_user_path() for that situation. Use file_user_path() instead of file_path() to get the path for MMAP and MMAP2 events. Example: Setup: # cd /root # mkdir test ; cd test ; mkdir lower upper work merged # cp `which cat` lower # mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged # perf record -e intel_pt//u -- /root/test/merged/cat /proc/self/maps ... 55b0ba399000-55b0ba434000 r-xp 00018000 00:1a 3419 /root/test/merged/cat ... [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.060 MB perf.data ] # Before: File name is wrong (/cat), so decoding fails: # perf script --no-itrace --show-mmap-events cat 367 [016] 100.491492: PERF_RECORD_MMAP2 367/367: [0x55b0ba399000(0x9b000) @ 0x18000 00:02 3419 489959280]: r-xp /cat ... # perf script --itrace=e | wc -l Warning: 19 instruction trace errors 19 # After: File name is correct (/root/test/merged/cat), so decoding is ok: # perf script --no-itrace --show-mmap-events cat 364 [016] 72.153006: PERF_RECORD_MMAP2 364/364: [0x55ce4003d000(0x9b000) @ 0x18000 00:02 3419 3132534314]: r-xp /root/test/merged/cat # perf script --itrace=e # perf script --itrace=e | wc -l 0 # Fixes: def3ae8 ("fs: store real path instead of fake path in backing file f_path") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Amir Goldstein <amir73il@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa4f4ba upstream. Some file systems like FUSE-based ones or overlayfs may record the backing file in struct vm_area_struct vm_file, instead of the user file that the user mmapped. That causes perf to misreport the device major/minor numbers of the file system of the file, and the generation of the file, and potentially other inode details. There is an existing helper file_user_inode() for that situation. Use file_user_inode() instead of file_inode() to get the inode for MMAP2 events. Example: Setup: # cd /root # mkdir test ; cd test ; mkdir lower upper work merged # cp `which cat` lower # mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged # perf record -e cycles:u -- /root/test/merged/cat /proc/self/maps ... 55b2c91d0000-55b2c926b000 r-xp 00018000 00:1a 3419 /root/test/merged/cat ... [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.004 MB perf.data (5 samples) ] # # stat /root/test/merged/cat File: /root/test/merged/cat Size: 1127792 Blocks: 2208 IO Block: 4096 regular file Device: 0,26 Inode: 3419 Links: 1 Access: (0755/-rwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2025-09-08 12:23:59.453309624 +0000 Modify: 2025-09-08 12:23:59.454309624 +0000 Change: 2025-09-08 12:23:59.454309624 +0000 Birth: 2025-09-08 12:23:59.453309624 +0000 Before: Device reported 00:02 differs from stat output and /proc/self/maps # perf script --show-mmap-events | grep /root/test/merged/cat cat 377 [-01] 243.078558: PERF_RECORD_MMAP2 377/377: [0x55b2c91d0000(0x9b000) @ 0x18000 00:02 3419 2068525940]: r-xp /root/test/merged/cat After: Device reported 00:1a is the same as stat output and /proc/self/maps # perf script --show-mmap-events | grep /root/test/merged/cat cat 362 [-01] 127.755167: PERF_RECORD_MMAP2 362/362: [0x55ba6e781000(0x9b000) @ 0x18000 00:1a 3419 0]: r-xp /root/test/merged/cat With respect to stable kernels, overlayfs mmap function ovl_mmap() was added in v4.19 but file_user_inode() was not added until v6.8 and never back-ported to stable kernels. FMODE_BACKING that it depends on was added in v6.5. This issue has gone largely unnoticed, so back-porting before v6.8 is probably not worth it, so put 6.8 as the stable kernel prerequisite version, although in practice the next long term kernel is 6.12. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Amir Goldstein <amir73il@gmail.com> Cc: stable@vger.kernel.org # 6.8 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c760bcd upstream. [Why] Not all renoir hardware supports secure display. If the TA is present but the feature isn't supported it will fail to load or send commands. This shows ERR messages to the user that make it seems like there is a problem. [How] Check the resp_status of the context to see if there was an error before trying to send any secure display commands. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1415 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Adrian Yip <adrian.ytw@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2a87a55 ] of_node_to_fwnode() is irqdomain's reimplementation of the "officially" defined of_fwnode_handle(). The former is in the process of being removed, so use the latter instead. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: Nipun Gupta <nipun.gupta@amd.com> Cc: Nikhil Agarwal <nikhil.agarwal@amd.com> Acked-by: Nipun Gupta <nipun.gupta@amd.com> Link: https://lore.kernel.org/r/20250415104734.106849-1-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 76254bc ("cdx: Fix device node reference leak in cdx_msi_domain_init") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e95db51 ] Do that before new dentry is visible anywhere. It does create a new possible state for dentries present in ->d_children/->d_sib - DCACHE_PAR_LOOKUP present, negative, unhashed, not in in-lookup hash chains, refcount positive. Those are going to be skipped by all tree-walkers (both d_walk() callbacks in fs/dcache.c and explicit loops over children/sibling lists elsewhere) and dput() is fine with those. NOTE: dropping the final reference to a "normal" in-lookup dentry (in in-lookup hash) is a bug - somebody must've forgotten to call d_lookup_done() on it and bad things will happen. With those it's OK; if/when we get around to making __dentry_kill() complain about such breakage, remember that predicate to check should *not* be just d_in_lookup(victim) but rather a combination of that with !hlist_bl_unhashed(&victim->d_u.d_in_lookup_hash). Might be worth considering later... Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Stable-dep-of: 56094ad ("vfs: Don't leak disconnected dentries on umount") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 56094ad ] When user calls open_by_handle_at() on some inode that is not cached, we will create disconnected dentry for it. If such dentry is a directory, exportfs_decode_fh_raw() will then try to connect this dentry to the dentry tree through reconnect_path(). It may happen for various reasons (such as corrupted fs or race with rename) that the call to lookup_one_unlocked() in reconnect_one() will fail to find the dentry we are trying to reconnect and instead create a new dentry under the parent. Now this dentry will not be marked as disconnected although the parent still may well be disconnected (at least in case this inconsistency happened because the fs is corrupted and .. doesn't point to the real parent directory). This creates inconsistency in disconnected flags but AFAICS it was mostly harmless. At least until commit f1ee616 ("VFS: don't keep disconnected dentries on d_anon") which removed adding of most disconnected dentries to sb->s_anon list. Thus after this commit cleanup of disconnected dentries implicitely relies on the fact that dput() will immediately reclaim such dentries. However when some leaf dentry isn't marked as disconnected, as in the scenario described above, the reclaim doesn't happen and the dentries are "leaked". Memory reclaim can eventually reclaim them but otherwise they stay in memory and if umount comes first, we hit infamous "Busy inodes after unmount" bug. Make sure all dentries created under a disconnected parent are marked as disconnected as well. Reported-by: syzbot+1d79ebe5383fc016cf07@syzkaller.appspotmail.com Fixes: f1ee616 ("VFS: don't keep disconnected dentries on d_anon") CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 208fff3 ] PCI_VDEVICE_SUB generates the pci_device_id struct layout for the specific PCI device/subdevice. Private data may follow the output. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: a7075f5 ("ixgbevf: fix mailbox API compatibility by negotiating supported features") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4c44b45 ] Add support for Intel(R) E610 Series of network devices. The E610 is based on X550 but adds firmware managed link, enhanced security capabilities and support for updated server manageability Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: a7075f5 ("ixgbevf: fix mailbox API compatibility by negotiating supported features") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 53f0eb6 ] E610 adapters no longer use the VFLINKS register to read PF's link speed and linkup state. As a result VF driver cannot get actual link state and it incorrectly reports 10G which is the default option. It leads to a situation where even 1G adapters print 10G as actual link speed. The same happens when PF driver set speed different than 10G. Add new mailbox operation to let the VF driver request a PF driver to provide actual link data. Update the mailbox api to v1.6. Incorporate both ways of getting link status within the legacy ixgbe_check_mac_link_vf() function. Fixes: 4c44b45 ("ixgbevf: Add support for Intel(R) E610 device") Co-developed-by: Andrzej Wilczynski <andrzejx.wilczynski@intel.com> Signed-off-by: Andrzej Wilczynski <andrzejx.wilczynski@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-2-ef32a425b92a@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: a7075f5 ("ixgbevf: fix mailbox API compatibility by negotiating supported features") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a7075f5 ] There was backward compatibility in the terms of mailbox API. Various drivers from various OSes supporting 10G adapters from Intel portfolio could easily negotiate mailbox API. This convention has been broken since introducing API 1.4. Commit 0062e7c ("ixgbevf: add VF IPsec offload code") added support for IPSec which is specific only for the kernel ixgbe driver. None of the rest of the Intel 10G PF/VF drivers supports it. And actually lack of support was not included in the IPSec implementation - there were no such code paths. No possibility to negotiate support for the feature was introduced along with introduction of the feature itself. Commit 339f289 ("ixgbevf: Add support for new mailbox communication between PF and VF") increasing API version to 1.5 did the same - it introduced code supported specifically by the PF ESX driver. It altered API version for the VF driver in the same time not touching the version defined for the PF ixgbe driver. It led to additional discrepancies, as the code provided within API 1.6 cannot be supported for Linux ixgbe driver as it causes crashes. The issue was noticed some time ago and mitigated by Jake within the commit d072531 ("ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5"). As a result we have regression for IPsec support and after increasing API to version 1.6 ixgbevf driver stopped to support ESX MBX. To fix this mess add new mailbox op asking PF driver about supported features. Basing on a response determine whether to set support for IPSec and ESX-specific enhanced mailbox. New mailbox op, for compatibility purposes, must be added within new API revision, as API version of OOT PF & VF drivers is already increased to 1.6 and doesn't incorporate features negotiate op. Features negotiation mechanism gives possibility to be extended with new features when needed in the future. Reported-by: Jacob Keller <jacob.e.keller@intel.com> Closes: https://lore.kernel.org/intel-wired-lan/20241101-jk-ixgbevf-mailbox-v1-5-fixes-v1-0-f556dc9a66ed@intel.com/ Fixes: 0062e7c ("ixgbevf: add VF IPsec offload code") Fixes: 339f289 ("ixgbevf: Add support for new mailbox communication between PF and VF") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-4-ef32a425b92a@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e7b9ecc ] TCP uses of dev_net() are under RCU protection, change them to dev_net_rcu() to get LOCKDEP support. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250301201424.2046477-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 833d431 ("mptcp: reset blackhole on success with non-loopback ifaces") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1549270 ] tcp_in_quickack_mode() is called from input path for small packets. It calls __sk_dst_get() which reads sk->sk_dst_cache which has been put in sock_read_tx group (for good reasons). Then dst_metric(dst, RTAX_QUICKACK) also needs extra cache line misses. Cache RTAX_QUICKACK in icsk->icsk_ack.dst_quick_ack to no longer pull these cache lines for the cases a delayed ACK is scheduled. After this patch TCP receive path does not longer access sock_read_tx group. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250312083907.1931644-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Stable-dep-of: 833d431 ("mptcp: reset blackhole on success with non-loopback ifaces") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 88fe142 ] dst->dev is read locklessly in many contexts, and written in dst_dev_put(). Fixing all the races is going to need many changes. We probably will have to add full RCU protection. Add three helpers to ease this painful process. static inline struct net_device *dst_dev(const struct dst_entry *dst) { return READ_ONCE(dst->dev); } static inline struct net_device *skb_dst_dev(const struct sk_buff *skb) { return dst_dev(skb_dst(skb)); } static inline struct net *skb_dst_dev_net(const struct sk_buff *skb) { return dev_net(skb_dst_dev(skb)); } static inline struct net *skb_dst_dev_net_rcu(const struct sk_buff *skb) { return dev_net_rcu(skb_dst_dev(skb)); } Fixes: 4a6ce2b ("net: introduce a new function dst_dev_put()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250630121934.3399505-7-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 833d431 ("mptcp: reset blackhole on success with non-loopback ifaces") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a74fc62 ] Use the new helpers as a first step to deal with potential dst->dev races. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250630121934.3399505-8-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 833d431 ("mptcp: reset blackhole on success with non-loopback ifaces") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1dbf1d5 ] In ip_output() skb->dev is updated from the skb_dst(skb)->dev this can become invalid when the interface is unregistered and freed, Introduced new skb_dst_dev_rcu() function to be used instead of skb_dst_dev() within rcu_locks in ip_output.This will ensure that all the skb's associated with the dev being deregistered will be transnmitted out first, before freeing the dev. Given that ip_output() is called within an rcu_read_lock() critical section or from a bottom-half context, it is safe to introduce an RCU read-side critical section within it. Multiple panic call stacks were observed when UL traffic was run in concurrency with device deregistration from different functions, pasting one sample for reference. [496733.627565][T13385] Call trace: [496733.627570][T13385] bpf_prog_ce7c9180c3b128ea_cgroupskb_egres+0x24c/0x7f0 [496733.627581][T13385] __cgroup_bpf_run_filter_skb+0x128/0x498 [496733.627595][T13385] ip_finish_output+0xa4/0xf4 [496733.627605][T13385] ip_output+0x100/0x1a0 [496733.627613][T13385] ip_send_skb+0x68/0x100 [496733.627618][T13385] udp_send_skb+0x1c4/0x384 [496733.627625][T13385] udp_sendmsg+0x7b0/0x898 [496733.627631][T13385] inet_sendmsg+0x5c/0x7c [496733.627639][T13385] __sys_sendto+0x174/0x1e4 [496733.627647][T13385] __arm64_sys_sendto+0x28/0x3c [496733.627653][T13385] invoke_syscall+0x58/0x11c [496733.627662][T13385] el0_svc_common+0x88/0xf4 [496733.627669][T13385] do_el0_svc+0x2c/0xb0 [496733.627676][T13385] el0_svc+0x2c/0xa4 [496733.627683][T13385] el0t_64_sync_handler+0x68/0xb4 [496733.627689][T13385] el0t_64_sync+0x1a4/0x1a8 Changes in v3: - Replaced WARN_ON() with WARN_ON_ONCE(), as suggested by Willem de Bruijn. - Dropped legacy lines mistakenly pulled in from an outdated branch. Changes in v2: - Addressed review comments from Eric Dumazet - Used READ_ONCE() to prevent potential load/store tearing - Added skb_dst_dev_rcu() and used along with rcu_read_lock() in ip_output Signed-off-by: Sharath Chandra Vurukala <quic_sharathv@quicinc.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250730105118.GA26100@hu-sharathv-hyd.qualcomm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 833d431 ("mptcp: reset blackhole on success with non-loopback ifaces") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 108a86c ] mptcp_active_enable() calls sk_dst_get(), which returns dst with its refcount bumped, but forgot dst_release(). Let's add missing dst_release(). Cc: stable@vger.kernel.org Fixes: 27069e7 ("mptcp: disable active MPTCP in case of blackhole") Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250916214758.650211-7-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 833d431 ("mptcp: reset blackhole on success with non-loopback ifaces") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 893c49a ] mptcp_active_enable() is called from subflow_finish_connect(), which is icsk->icsk_af_ops->sk_rx_dst_set() and it's not always under RCU. Using sk_dst_get(sk)->dev could trigger UAF. Let's use __sk_dst_get() and dst_dev_rcu(). Fixes: 27069e7 ("mptcp: disable active MPTCP in case of blackhole") Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250916214758.650211-8-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 833d431 ("mptcp: reset blackhole on success with non-loopback ifaces") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 833d431 ] When a first MPTCP connection gets successfully established after a blackhole period, 'active_disable_times' was supposed to be reset when this connection was done via any non-loopback interfaces. Unfortunately, the opposite condition was checked: only reset when the connection was established via a loopback interface. Fixing this by simply looking at the opposite. This is similar to what is done with TCP FastOpen, see tcp_fastopen_active_disable_ofo_check(). This patch is a follow-up of a previous discussion linked to commit 893c49a ("mptcp: Use __sk_dst_get() and dst_dev_rcu() in mptcp_active_enable()."), see [1]. Fixes: 27069e7 ("mptcp: disable active MPTCP in case of blackhole") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/4209a283-8822-47bd-95b7-87e96d9b7ea3@kernel.org [1] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250918-net-next-mptcp-blackhole-reset-loopback-v1-1-bf5818326639@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…te machine [ Upstream commit 2c27aae ] Do read-modify-write so that we re-use the characterized reset value as specified in TRM [1] to program calibration wait time which defines number of cycles to wait for after startup state machine is in bandgap enable state. This fixes PLL lock timeout error faced while using RPi DSI Panel on TI's AM62L and J721E SoC since earlier calibration wait time was getting overwritten to zero value thus failing the PLL to lockup and causing timeout. [1] AM62P TRM (Section 14.8.6.3.2.1.1 DPHY_TX_DPHYTX_CMN0_CMN_DIG_TBIT2): Link: https://www.ti.com/lit/pdf/spruj83 Cc: stable@vger.kernel.org Fixes: 7a343c8 ("phy: Add Cadence D-PHY support") Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Tested-by: Harikrishna Shenoy <h-shenoy@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://lore.kernel.org/r/20250704125915.1224738-3-devarsht@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4b47a86 ] Avoid a crash if a pNFS client should happen to send a LAYOUTCOMMIT operation on a FlexFiles layout. Reported-by: Robert Morris <rtm@csail.mit.edu> Closes: https://lore.kernel.org/linux-nfs/152f99b2-ba35-4dec-93a9-4690e625dccd@oracle.com/T/#t Cc: Thomas Haynes <loghyr@hammerspace.com> Cc: stable@vger.kernel.org Fixes: 9b9960a ("nfsd: Add a super simple flex file server") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f04aad3 upstream. syzkaller discovered the following crash: (kernel BUG) [ 44.607039] ------------[ cut here ]------------ [ 44.607422] kernel BUG at mm/userfaultfd.c:2067! [ 44.608148] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 44.608814] CPU: 1 UID: 0 PID: 2475 Comm: reproducer Not tainted 6.16.0-rc6 #1 PREEMPT(none) [ 44.609635] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 44.610695] RIP: 0010:userfaultfd_release_all+0x3a8/0x460 <snip other registers, drop unreliable trace> [ 44.617726] Call Trace: [ 44.617926] <TASK> [ 44.619284] userfaultfd_release+0xef/0x1b0 [ 44.620976] __fput+0x3f9/0xb60 [ 44.621240] fput_close_sync+0x110/0x210 [ 44.622222] __x64_sys_close+0x8f/0x120 [ 44.622530] do_syscall_64+0x5b/0x2f0 [ 44.622840] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 44.623244] RIP: 0033:0x7f365bb3f227 Kernel panics because it detects UFFD inconsistency during userfaultfd_release_all(). Specifically, a VMA which has a valid pointer to vma->vm_userfaultfd_ctx, but no UFFD flags in vma->vm_flags. The inconsistency is caused in ksm_madvise(): when user calls madvise() with MADV_UNMEARGEABLE on a VMA that is registered for UFFD in MINOR mode, it accidentally clears all flags stored in the upper 32 bits of vma->vm_flags. Assuming x86_64 kernel build, unsigned long is 64-bit and unsigned int and int are 32-bit wide. This setup causes the following mishap during the &= ~VM_MERGEABLE assignment. VM_MERGEABLE is a 32-bit constant of type unsigned int, 0x8000'0000. After ~ is applied, it becomes 0x7fff'ffff unsigned int, which is then promoted to unsigned long before the & operation. This promotion fills upper 32 bits with leading 0s, as we're doing unsigned conversion (and even for a signed conversion, this wouldn't help as the leading bit is 0). & operation thus ends up AND-ing vm_flags with 0x0000'0000'7fff'ffff instead of intended 0xffff'ffff'7fff'ffff and hence accidentally clears the upper 32-bits of its value. Fix it by changing `VM_MERGEABLE` constant to unsigned long, using the BIT() macro. Note: other VM_* flags are not affected: This only happens to the VM_MERGEABLE flag, as the other VM_* flags are all constants of type int and after ~ operation, they end up with leading 1 and are thus converted to unsigned long with leading 1s. Note 2: After commit 31defc3 ("userfaultfd: remove (VM_)BUG_ON()s"), this is no longer a kernel BUG, but a WARNING at the same place: [ 45.595973] WARNING: CPU: 1 PID: 2474 at mm/userfaultfd.c:2067 but the root-cause (flag-drop) remains the same. [akpm@linux-foundation.org: rust bindgen wasn't able to handle BIT(), from Miguel] Link: https://lore.kernel.org/oe-kbuild-all/202510030449.VfSaAjvd-lkp@intel.com/ Link: https://lkml.kernel.org/r/20251001090353.57523-2-acsjakub@amazon.de Fixes: 7677f7f ("userfaultfd: add minor fault registration mode") Signed-off-by: Jakub Acs <acsjakub@amazon.de> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: SeongJae Park <sj@kernel.org> Tested-by: Alice Ryhl <aliceryhl@google.com> Tested-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Xu Xin <xu.xin16@zte.com.cn> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [acsjakub@amazon.de: adjust context in bindgings_helper.h] Signed-off-by: Jakub Acs <acsjakub@amazon.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3bbf004 upstream. Add cputype definitions for Neoverse-V3AE. These will be used for errata detection in subsequent patches. These values can be found in the Neoverse-V3AE TRM: https://developer.arm.com/documentation/SDEN-2615521/9-0/ ... in section A.6.1 ("MIDR_EL1, Main ID Register"). Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c33aa1 upstream. Neoverse-V3AE is also affected by erratum #3312417, as described in its Software Developer Errata Notice (SDEN) document: Neoverse V3AE (MP172) SDEN v9.0, erratum 3312417 https://developer.arm.com/documentation/SDEN-2615521/9-0/ Enable the workaround for Neoverse-V3AE, and document this. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Upstream commit b7cb9a0 ("dmaengine: idxd: Fix refcount underflow on module unload") fixes a refcount underflow by replacing the call to idxd_cleanup() in the remove function with direct cleanup calls. That works fine upstream. However, upstream removed support for IOMMU_DEV_FEAT_IOPF, which is still supported in v6.12.y. The backport of commit b7cb9a0 into v6.12.y misses the call to disable it. This results in a warning backtrace when unloading and reloading the module. WARNING: CPU: 0 PID: 665849 at drivers/pci/ats.c:337 pci_reset_pri+0x4c/0x60 ... RIP: 0010:pci_reset_pri+0xa7/0x130 Add the missing cleanup call to fix the problem. Fixes: ce81905 ("dmaengine: idxd: Fix refcount underflow on module unload") Cc: Yi Sun <yi.sun@intel.com> Cc: Shuai Xue <xueshuai@linux.alibaba.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20251021195035.953989698@linuxfoundation.org Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Hardik Garg <hargar@linux.microsoft.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20251022060141.370358070@linuxfoundation.org Tested-by: Brett A C Sheffield <bacs@librecast.net> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Pavel Machek (CIP) <pavel@denx.de> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Dileep Malepu <dileep.debian@gmail.com> Tested-by: Hardik Garg <hargar@linux.microsoft.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove CONFIG_MEDIA_PCI_HAILO from all the arm64 defconfig files as this driver is no longer built in the kernel tree. Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Add support for the AD799[1,2,3,4,5,7,8,9] ADCs to the i2c-sensor overlay. Signed-off-by: Phil Elwell <phil@raspberrypi.com>
There was a problem hiding this comment.
Pull Request Overview
This pull request contains a collection of miscellaneous fixes and improvements across multiple subsystems including networking, filesystems, media drivers, USB, and testing infrastructure. The changes address various issues ranging from bug fixes and error handling improvements to code refactoring and feature additions.
Key changes:
- Network stack improvements including TCP performance optimizations and safer device access patterns
- Filesystem fixes for XFS, ext4, btrfs, and SMB clients
- USB gadget driver cleanup using new DEFINE_FREE macro
- Intel ixgbevf driver updates adding support for E610 VF devices
Reviewed Changes
Copilot reviewed 217 out of 217 changed files in this pull request and generated no comments.
Show a summary per file
| File | Description |
|---|---|
| tools/testing/selftests/bpf/prog_tests/arg_parsing.c | Added fsync and improved error handling in test |
| sound/usb/card.c | Safer null checking for USB interface |
| sound/soc/codecs/nau8821.c | Fixed spelling, renamed function, added Steam Deck quirks |
| sound/soc/codecs/idt821034.c | Adjusted gain ranges |
| sound/soc/amd/acp/acp-sdw-sof-mach.c | Moved debug statement after null check |
| sound/firewire/amdtp-stream.h | Fixed spelling in comment |
| net/tls/tls_sw.c | Fixed goto labels and added encryption completion handling |
| net/tls/tls_main.c | Reordered operations in cmsg processing |
| net/mptcp/ctrl.c | Safer dst device access with RCU locking |
| net/ipv6/tcp_ipv6.c | Replaced dev_net with dev_net_rcu for safer access |
| net/ipv4/tcp_output.c | Improved TSO defer logic with better variable naming |
| net/ipv4/tcp_input.c | Simplified quickack mode check using cached value |
| net/ipv4/tcp_fastopen.c | Safer dst device access |
| net/ipv4/route.c | Replaced dst->dev with dst_dev() helper |
| net/ipv4/ip_output.c | Added RCU locking for device access |
| net/core/sock.c | Cache RTAX_QUICKACK in connection sock, use dst_dev() |
| net/core/dst.c | Added WRITE_ONCE for dst->dev assignment |
| fs/xfs/* | Fixed CRC calculation for cross-platform compatibility |
| fs/smb/server/* | Added proper locking for RPC operations |
| fs/smb/client/* | Fixed error handling paths |
| drivers/usb/gadget/* | Refactored to use DEFINE_FREE for automatic cleanup |
| drivers/net/ethernet/intel/ixgbevf/* | Added E610 VF support and API version 1.6/1.7 |
| drivers/net/can/m_can/m_can.c | Improved CAN state handling |
| drivers/media/platform/nxp/imx8-isi/* | Moved streaming setup to vb2 prepare/unprepare |
Comments suppressed due to low confidence (3)
sound/soc/codecs/nau8821.c:1
- [nitpick] Corrected spelling of 'interruption' to 'interrupt' in comment for consistency with kernel documentation style.
fs/xfs/libxfs/xfs_log_format.h:1 - Corrected spacing in 'ofthe' to 'of the'.
fs/xfs/libxfs/xfs_log_format.h:1 - Corrected spelling of 'becaue' to 'because'.
💡 Add Copilot custom instructions for smarter, more guided reviews. Learn how to get started.
crossplatformdev
merged commit 143d687
into
crossplatformdev:rpi-6.12.y
11 of 12 checks passed
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
20 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.