___          __     _             ____  __   _______    __   _ __                    
  / _ | _______/ /_ __(_)__  ___    / __ \/ /  / __/ _ \  / /  (_) /  _______ _______ __
 / __ |/ __/ _  / // / / _ \/ _ \  / /_/ / /__/ _// // / / /__/ / _ \/ __/ _ `/ __/ // /
/_/ |_/_/  \_,_/\_,_/_/_//_/\___/  \____/____/___/____/ /____/_/_.__/_/  \_,_/_/  \_, / 
                                                                                 /___/  
OLED Library file for the Arduino platform. This Library will contain the basic drawing 
and displaying functions for the 4D Systems OLED display modules. 

My Circuit Design is also using an NPN Transistor to act as a power on switch from the
Arduino board. This allows the Arduino to power up first and start the code before giving
power to the Display which can cause damage. 

Note this file is currently working with the original PMMC File
uOLED-96-G1-uSD-Serial_rev1.pmmc
If you are not able to get the display working correctly, please try updating your OLED
firmware with the file listed above, or make sure you have the latest from 4DSystems.

----------------------------------------------------------------------------------------

Basic Commands of OLED Library

OLED myOLED(7,8,2500,57600); 
//pinPower, pinReset, baudRate, startUpTimer

myOLED.Init();
//Turn on OLED Display

myOLED.Clear();
//Clear Screen
  
myOLED.ResetDisplay();
//Resets Display Unit

myOLED.get16bitRGB(random(255),random(255),random(255));
//Returns the RGB color value in two bytes for the OLED

myOLED.PenSize(size);
//Set pixel size of pen
	
myOLED.PutPixel(x,y,color);
//Places a pixel on the screen at x and y with listed color value

myOLED.DrawLine	(x,y,x2,y2,color);
//Draws a line from the listed x,y to the x2,y2 with listed color value	

myOLED.DrawRectangle (x,y,width,height,color);
//Draws a rectangle from the listed x,y at the width and height with listed color value	
	
myOLED.DrawCircle (x,y,radius,color);
//Draws a circle from the listed x,y at the radius with listed color value
	
myOLED.SetFontSize(8);	
//Set Font size using 00hex : 5x7 small 01hex : 8x8 medium 02hex : 8x12 large

myOLED.DrawText(column, row, fontSize, *mytext, color)	
//Display text at the column and row listed with font size and listed color. *myText is an array of characters.
myOLED.DrawSingleChar
	
myOLED.CopyPast		

myOLED.SaveBitChar	
	
myOLED.DisplayBitChar