| copyright | lastupdated | keywords | subcollection | ||
|---|---|---|---|---|---|
|
2019-03-11 |
File Storage, file storage, NFS, replication, duplication, synchronous, replica schedule, replica space, disaster recovery |
FileStorage |
{:new_window: target="_blank"} {:pre: .pre} {:tip: .tip} {:note: .note} {:important: .important}
{: #replication}
Replication uses one of your snapshot schedules to automatically copy snapshots to a destination volume in a remote data center. The copies can be recovered in the remote site if a catastrophic event occurs or your data becomes corrupted.
Replication keeps your data in sync in two different locations. If you want to clone your volume and use it independently from the original volume, see Creating a duplicate File Volume. {:tip}
Before you can replicate, you must create a snapshot schedule. {:important}
{{site.data.keyword.BluSoftlayer_full}}'s data centers are paired into primary and remote combinations worldwide. See Table 1 for the complete list of data center availability and replication targets.
Table 1 - This table shows the complete list of data centers with enhanced capabilities in each region. Every region is a separate column. Some cities, such as Dallas, San Jose, Washington DC, Amsterdam, Frankfurt, London, and Sydney have multiple data centers.
* Data centers in US 1 region do NOT have enhanced storage. Hosts in data centers with enhanced storage capabilities can't start replication with replica targets in US 1 data centers.
| US 1 * | US 2 | Latin America | Canada | Europe | Asia-Pacific | Australia |
|---|---|---|---|---|---|---|
| DAL01 DAL05 DAL06 HOU02 SJC01 WDC01 |
SJC03 SJC04 WDC04 WDC06 WDC07 DAL09 DAL10 DAL12 DAL13 |
MEX01 SAO01 |
TOR01 MON01 |
AMS01 AMS03 FRA02 FRA04 FRA05 LON02 LON04 LON05 LON06 OSL01 PAR01 MIL01 |
HKG02 TOK02 TOK04 TOK05 SNG01 SEO01 CHE01 |
SYD01 SYD04 SYD05 MEL01 |
Replications work based on a snapshot schedule. You must first have snapshot space and a snapshot schedule for the source volume before you can replicate. If you try to set up replication and one or the other isn't in place, you are going to be prompted to purchase more space or set up a schedule. Replications are managed under Storage > {{site.data.keyword.filestorage_short}} in the {{site.data.keyword.slportal}} 
{:new_window}.
-
Click your storage volume.
-
Click Replica and click Purchase a replication.
-
Select the existing snapshot schedule that you want your replication to follow. The list contains all of your active snapshot schedules.
You can select only one schedule even if you have a mix of hourly, daily, and weekly. All snapshots that were captured since the previous replication cycle, are replicated regardless of the schedule that originated them.
If you don't have Snapshots that are set up, you are prompted to do so before you can order replication. For more information, see Working with Snapshots. {:tip} -
Click Location, and select the data center that is your DR site.
-
Click Continue.
-
Enter in a Promo Code if you have one, and click Recalculate. The other fields in the window are completed by default.
Discounts are applied when the order is processed. {:note}
-
Click the I have read the Master Service Agreement… check box, and click Place Order.
You can edit your replication schedule, and change your replication space from either the Primary or Replica tab under Storage > {{site.data.keyword.filestorage_short}} from the {{site.data.keyword.slportal}} {:new_window}.
The replication schedule is based on an existing snapshot schedule. To change the replica schedule from Hourly to Daily or Weekly or vice versa, you must cancel the replica volume and set up a new one.
However, if you want to change the time of day when your Daily replication occurs, you can adjust the existing schedule on the Primary or Replica tab.
- Click Actions on either the Primary or Replica tab.
- Select Edit Snapshot Schedule.
- Look in the Snapshot frame under Schedule to determine which schedule you're using for replication. Change the schedule that you want.
- Click Save.
Your primary snapshot space and your replica space must be the same. If you change the space on the Primary or Replica tab, it automatically adds space to both your source and destination data centers. Increasing snapshot space triggers an immediate replication update also.
- Click Actions on either the Primary or Replica tab.
- Select Add More Snapshot Space.
- Select the storage size from the list and click Continue.
- Enter in a Promo Code if you have one and click Recalculate. The other fields in the dialog box are completed by default.
- Click the I have read the Master Service Agreement… check box and click Place Order.
Increasing the Snapshot space in the replica data center when Snapshot space is increased in the primary data center
Your volume sizes must be the same for your primary and replica storage volumes. One can't be larger than the other. When you increase your snapshot space for your primary volume, the replica space is automatically increased. Increasing snapshot space triggers an immediate replication update. The increase to both volumes shows as line items on your invoice and is prorated as necessary.
For more information about increasing snapshot space, see Snapshots.
You can view your replication volumes on the {{site.data.keyword.filestorage_short}} page under Storage > {{site.data.keyword.filestorage_short}}. The volume name shows the primary volume's name followed by REP. The Type is Endurance or Performance – Replica. The Target Address is N/A because the replica volume isn't mounted at the replica data center, and the Status shows Inactive.
You can view the replica volume details on the Replica tab under Storage > {{site.data.keyword.filestorage_short}}. Another option is to select the replica volume from the {{site.data.keyword.filestorage_short}} page and click the Replica tab.
Replication history is viewed on the Audit Log on the Account tab under Manage. Both the primary and replica volumes display identical replication histories, which include
- Type for replication (failover or failback),
- When it was initiated,
- Snapshot that was used for the replication,
- Size of the replication,
- When it completed.
You can create a duplicate of an existing {{site.data.keyword.BluSoftlayer_full}} {{site.data.keyword.filestorage_full}}. The duplicate volume inherits the capacity and performance options of the original storage volume by default and has a copy of the data up to the point-in-time of a snapshot.
Duplicates can be created from both primary and replica volumes. The new duplicate is created in the same data center as the original volume. If you create a duplicate from a replica volume, the new volume is created in the same data center as the replica volume.
Duplicate volumes can be accessed by a host for read/write as soon as the storage is provisioned. However, snapshots and replication aren't allowed until the data copy from the original to the duplicate is complete.
For more information, see Creating a duplicate File Volume
When you fail over, you’re "flipping the switch" from your storage volume in your primary data center to the destination volume in your remote data center. For example, your primary data center is London and your secondary data center is Amsterdam. If a failure event occurs, you’d fail over to Amsterdam – connecting to the now-primary volume from a compute instance in Amsterdam. After your volume in London is repaired, a snapshot is taken of the Amsterdam volume to fail back to London and the once-again primary volume from a compute instance in London.
- If the primary location is experiencing problem but the storage and host are still online, see Fail over with an accessible Primary volume.
- If the primary location is down, see Fail over with an inaccessible Primary volume.
You can cancel replication either immediately or on the anniversary date, which causes billing to end. Replication can be canceled from either the Primary or Replica tabs.
- Click the volume from the {{site.data.keyword.filestorage_short}} page.
- Click Actions on either the Primary or Replica tab.
- Select Cancel Replica.
- Select when to cancel. Choose Immediately or Anniversary Date, and click Continue.
- Click I acknowledge that due to cancellation, data loss may occur, and click Cancel Replica.
When a primary volume is canceled, the replication schedule and the volume in the replica data center are deleted. Replicas are canceled from the {{site.data.keyword.filestorage_short}} page.
- Highlight your volume on the {{site.data.keyword.filestorage_short}} page.
- Click Actions and select Cancel for {{site.data.keyword.filestorage_short}}.
- Select when to cancel the volume. Choose Immediately or Anniversary Date, and click Continue.
- Click I acknowledge that due to cancellation, data loss may occur, and click Cancel.
{: #clicommands}
-
List suitable replication datacenters for a specific volume.
# slcli file replica-locations --help Usage: slcli file replica-locations [OPTIONS] VOLUME_ID Options: --sortby TEXT Column to sort by --columns TEXT Columns to display. Options: ID, Long Name, Short Name -h, --help Show this message and exit. -
Order a file storage replica volume.
# slcli file replica-order --help Usage: slcli file replica-order [OPTIONS] VOLUME_ID Options: -s, --snapshot-schedule [INTERVAL|HOURLY|DAILY|WEEKLY] Snapshot schedule to use for replication, (INTERVAL | HOURLY | DAILY | WEEKLY) [required] -l, --location TEXT Short name of the data center for the replicant (e.g.: dal09) [required] --tier [0.25|2|4|10] Endurance Storage Tier (IOPS per GB) of the primary volume for which a replicant is ordered [optional] -h, --help Show this message and exit. -
List existing replicant volumes for a file volume.
# slcli file replica-partners --help Usage: slcli file replica-partners [OPTIONS] VOLUME_ID Options: --sortby TEXT Column to sort by --columns TEXT Columns to display. Options: ID, Username, Account ID, Capacity (GB), Hardware ID, Guest ID, Host ID -h, --help Show this message and exit. -
Failover a file volume to a specific replicant volume.
# slcli file replica-failover --help Usage: slcli file replica-failover [OPTIONS] VOLUME_ID Options: --replicant-id TEXT ID of the replicant volume --immediate Failover to replicant immediately. -h, --help Show this message and exit. -
Failback a file volume from a specific replicant volume.
# slcli file replica-failback --help Usage: slcli file replica-failback [OPTIONS] VOLUME_ID Options: --replicant-id TEXT ID of the replicant volume -h, --help Show this message and exit.